FSP250-60PLC

: 100 x 125 x 86
: , .
: 250

FSP250-60PLC . 250 . PFC (Power Factor Correction) . , , . , .


,NAS .





  • 80 Plus Bronze
  • Low Ripple & Noise



  • 4
  • 100%
  • :100 000 25℃
200
*
Model Name FSP250-60PLC
Wattage 250W
Dimension 100mm (L) × 125 mm (W) × 86mm (H)
Product Highlight Efficiency Level 80 Plus Bronze

PMBus For standard, advanced server, NAS and industrial power system.
General Specification Effciency 85% 230VAC

Voltage Regulation +3.3V, +12V, +5V, +5SB: ±5%
-12V, -5V: ±10%

Inrush current 26.8A @ 110V, or 61A @ 220V

PWOK Delay Time 500ms > PWOK > 100ms
Input Electrical Specification Input Frequency 47 ~ 63 Hz

Input Current 115V@ 3.0 Amps-rms maximum
230V@ 1.5 Amps-rms maximum
Output Specification Hold-up time 115V/60Hz 15mSec. Minimum@100% Load,
230V/50Hz 15mSec. Minimum@100% Load

Ouput Voltage Regulation +3.3Vdc output : +3.7 Vdc minimum, + 4.5Vdc maximum
+5Vdc output : +5.7 Vdc minimum, + 7Vdc maximum
+12Vdc output : +13.3 Vdc minimum, + 15.5Vdc maximum

Ripple & Noise 115V-rms/230V-rms 5V 20ms Maximum
115V-rms/230V-rms 12V 20ms Maximum

Over current protection 3.3V:50mV p-p
5V:50mV p-p
12V1:120mV p-p
-12V:120mV p-p
5Vsb:50mV p-p
-5V:100mV p-p

Short Circuit Protection load < 0.1 Ohm
Environmental Requirement Temperature Range Operating : 0 to +50℃
Storage :-20 to +80℃

Humidity Operating : 85% to % RH, Non-condensing
Storage : 95% to % RH, Non-condensing

MBTF The power supply have a minimum predicted MTBF(MIL-HDBK-217) of 100,000 hours of continuous operation at 25℃, maximum-output load, and nominal AC inout voltage
Safety CE,FCC,TUV,UL/cUL

Output Voltage and Current Rating


+3.3V +5V +12V1 -12V -5V +5Vsb
Ripple-Noise(R-P) mV 50mV 50mV 120mV 120mV 100mV 50mV
Regulation Load % ±5% ±5% ±5% ±10% ±10% ±5%
Output Max.(A) 14A 17A 18A 0.3A 0.2A 2.5A
Output Min.(A) 0.3A 0.5A 1A 0A 0A 0A